Nemanja Avramović
22. 11. 2007., 03:29
DakleM, pitanje je jednostavno, ali ne znam koliko je rešenje problema jednostavno: Kako napraviti autorun sa USB flash-a. Pretraživao sam internet i znam da je ovo moguće uraditi, samo ne znam kako. Evo šta MS kaže za to:
http://www.microsoft.com/whdc/device/storage/usbfaq.mspx
Q: What must I do to trigger Autorun on my USB storage device?
The Autorun capabilities are restricted to CD-ROM drives and fixed disk drives. If you need to make a USB storage device perform Autorun, the device must not be marked as a removable media device and the device must contain an Autorun.inf file and a startup application.
The removable media device setting is a flag contained within the SCSI Inquiry Data response to the SCSI Inquiry command. Bit 7 of byte 1 (indexed from 0) is the Removable Media Bit (RMB). A RMB set to zero indicates that the device is not a removable media device. A RMB of one indicates that the device is a removable media device. Drivers obtain this information by using the StorageDeviceProperty request.
E sad, pravo pitanje je da li se može, i kako, promeniti taj bit? Odnosno da li to mogu ja kao korisnik USB flash drive-a da odradim, ili to mora proizvođač istog da uradi? Neko ima iskustva sa ovim? :)
http://www.microsoft.com/whdc/device/storage/usbfaq.mspx
Q: What must I do to trigger Autorun on my USB storage device?
The Autorun capabilities are restricted to CD-ROM drives and fixed disk drives. If you need to make a USB storage device perform Autorun, the device must not be marked as a removable media device and the device must contain an Autorun.inf file and a startup application.
The removable media device setting is a flag contained within the SCSI Inquiry Data response to the SCSI Inquiry command. Bit 7 of byte 1 (indexed from 0) is the Removable Media Bit (RMB). A RMB set to zero indicates that the device is not a removable media device. A RMB of one indicates that the device is a removable media device. Drivers obtain this information by using the StorageDeviceProperty request.
E sad, pravo pitanje je da li se može, i kako, promeniti taj bit? Odnosno da li to mogu ja kao korisnik USB flash drive-a da odradim, ili to mora proizvođač istog da uradi? Neko ima iskustva sa ovim? :)